5052 aluminum sheet is AL-Mg alloy aluminum plate. Magnesium is the main alloying element in 5052 alloy aluminum plate. It is the most widely used type of rust-proof aluminum. This alloy has high strength, especially fatigue resistance: plasticity and corrosion resistance. High performance, can not be strengthened by heat treatment, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished.
Aluminum-magnesium alloys also contain small amounts of manganese, chromium, beryllium, titanium, and so on. Except for a small amount of solid solution, the manganese in the alloy forms MnAl6. The effect of chromium in 5052 aluminum plate is similar to that of manganese. It improves the resistance to stress corrosion cracking, increases the strength of the base metal and the weld, and reduces the tendency of welding cracks, but its content generally does not exceed 0.35%.
Material name: Aluminum and aluminum alloy extruded bar (≤150mm, H112, T6, O state)
① 5052 belongs to Al-Mg series alloy, which is widely used, especially in the construction industry, it is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.
The main alloying element of 5052 is magnesium, which has good formability, corrosion resistance, weldability, and medium strength. It is used to manufacture aircraft fuel tanks, oil pipes, sheet metal parts for transportation vehicles and ships, meters, street light brackets and rivets, Hardware products, electrical appliances, etc.
② AL-Mn series alloy is the most widely used type of rust-proof aluminum. This alloy has high strength, especially anti-fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment. Good, low plasticity during cold hardening, good corrosion resistance, good weldability, poor machinability, and polishing. Uses are mainly used for low-load parts that require high plasticity and good weldability, such as oil tanks, gasoline or lubricating oil pipes, various liquid containers and other small-load parts made by deep-drawing: Wire is used for rivets.
5052 aluminum plate is mainly used for high plasticity and good weldability. It is also often used in sheet metal parts of traffic vehicles, ships, meters, street lamp brackets and rivets, hardware products, electrical enclosures, etc. It can also be used in the manufacture of aircraft fuel tanks, fuel pipes, and aerospace aluminum alloy materials. It is a typical antirust alloy material.
5052 aluminum plate specifications：
Aluminum plate thickness: 0.15mm-50mm, width: 100mm-2000mm, length: 1000mm-9000mm,
Aluminum coil thickness: 0.05mm-15mm, width: 15mm-2000mm
Thermal insulation aluminum plate thickness: 0.3mm-0.9mm width: 500mm-1000mm length: unlimited
Non-slip aluminum plate thickness: 1mm-10mm width: 1000mm-1500mm length: 2000-3000mm
Embossed aluminum plate thickness: 0.1mm-0.9mm width: 500mm-1200mm length: unlimited