Slip on Flanges

Slip on Flanges

Slip On Flanges Size: 1/2” to 60”, DN 12mm to DN 1500mm Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250 Facing: RF / RTJ
Chat Now

Product Details

Slip On Flanges

Size: 1/2” to 60”, DN 12mm to DN 1500mm .
Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250
Facing: RF / RTJ

       Slip-On Pipe Flanges. As made obvious by their name, these pipe flanges slip over the pipe. They're manufactured with an inside diameter that is slightly bigger than the pipe's outside diameter. These attachments are connected to the pipe via fillet weld at the top and bottom of the flange.

However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation. Moreover, weld-neck flanges have a higher life expentancy than slip-on flanges under duress.

       Slip-on flanges are all bored slightly larger than the O.D. of the pipe. They are preferred over welding neck flanges bu many users due to their lower intial cost, but final intallation cost is probably not much less than that of the welding neck flange because of the additional welding involved.

Weldneck and Slip-On Orifice Runs 

图片11515

Advantages of slip on flanges:

Low cost installation

Less time needed to spent on ensuring the accuracy of the cut pipe

They are somewhat easier to align

The slip-on flanges have low hub because the pipe slips into the flange before welding

The flange is welded both inside and outside to provide sufficient strength

They prevent leakage

Standards, Dimensions & Weight

        Slip-on flange is slipped over the pipe and then fillet welded. Slip-on flanges are easy to use in fabricated applications.

       A combination of flange and elbow or flange and tee is not possible, because named fittings have not a straight end, that complete slid in the Slip On flange.

15484

1. Slip On flange 2. Filled weld outside 3. Filled weld inside 4. Pipe

Material of Slip-on flange:

Slip on pipe flanges in stock include AWWA slip on pipe flanges, ANSI slip on pipe flanges, Pressure Vessel slip on pipe flanges and slip on pipe flanges that match the OD and drilling of ASME flanges. Cabon steel: A105, A350 LF2
Stainless steel: A182 F304/F304L/F316/F316L/F321
Alloy steel: F11, F12
Packing: plywood case and plywood pallet

Slip On Flanges

     If you require further information or you do not see what yo need in our web,please do not hesitate to contact us. Our customer service specialists will be happy to help you. 

contact us any time:info@jiade-group.com


Inquiry